收藏本站
RN-134
www.rovingnetworks.com
WiFly GSX Super Module
“SuRF Board”
Features
rn-134-ds v1.1 12/14/2009
?
?
?
?
?
UART interface with RS232 and TTL
signaling
Through hole board simplifies system
integration
Accepts 3-12VDC
Status LEDs to show network status and data
transfer
Ultra-low power - 4uA sleep, 50mA Rx,
210mA Tx (max)
?
?
?
?
?
?
?
?
?
?
High throughput, 1Mbps sustained data rate
with TCP/IP and WPA2
Through hole design with mounting posts
Jumpers for setting adhoc mode
On board ceramic chip antenna and U.FL
connector for external antenna
10 general purpose digital I/O
8 analog sensor interfaces
Real-time clock for wakeup and time stamping
On board ECOS -OS, TCP/IP stacks
Wi-Fi Alliance certified for WPA2-PSK
FCC / CE/ ICS certified and RoHS compliant.
Description
The RN-134 “SuRF” board is field ready, WiFi certified
802.11 b/g solution. The SuRF board has the
flexibility to connect directly to a standard RS232
interface or through the TTL UART interface to
embedded systems. The status LEDs and jumpers
enable rapid prototyping and integrating into existing
systems.
The RN-134 is built upon Roving Networks RN-131
WiFly-GSX module. The WiFly GSX module
incorporates a 2.4GHz radio, processor, Full TCP/IP
stack, real-time clock, FTP, DHCP, DNS and web
server. The RN-131G is the smallest, lowest power
802.11 b/g module available. The module supports
adho c and infrastructure networking.
Applications
In the simplest configuration the hardware only
?
?
?
?
?
?
Wireless serial connections
Remote sensors
Telemetry
Security
Industrial sensors and controls
Home Automation
requires four connections (PWR, TX, RX, GND). In
cases where power is available on the RS232 DB9
connector of your application, the RN134 can be
directly wired to create an instant serial to Wifi
network link.
Additionally, the analog sensor interface provides
direct connections to send temperature, acceleration
and other analog data without requiring additional
hardware. The WiFly GSX module is programmed and
controlled with a simple ASCII command language.
Once the WiFly GSX is setup it can scan to find an
access point, associate, authenticate and connect
over any WifI network.
809 University Avenue ? Los Gatos, CA 95032 ? Tel (408) 395-6539 ? info@RovingNetworks.com
~ page 1 ~
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
RN-422M ADAPTER BLUETOOTH FIREFLY RS422
RN41-I/RM MODULE BLUETOOTH W/ANT CLASS1
RN42N-I/RM MODULE BLUETOOTH V2.0+EDR
RP1A090ZPTR MOSFET P-CH 12V 9A MPT6
RP1E050RPTR MOSFET P-CH 30V 5A MPT6
RP1E090RPTR MOSFET P-CH 30V 9A MPT6
RP1E100RPTR MOSFET P-CH 30V 10A MPT6
RPM-012PBT97 PHOTOTRANSISTOR SIDE VIEW SMD
相关代理商/技术参数
RN13765 制造商: 功能描述: 制造商:undefined 功能描述:
RN1401 制造商:Toshiba America Electronic Components 功能描述:
RN1401(F) 制造商:Toshiba 功能描述:NPN 50V 100mA 4.7 / 4.7 S-Mini Tape & Reel
RN1401(TE85F) 制造商:Toshiba America Electronic Components 功能描述:Trans Digital BJT NPN 50V 100mA 3-Pin S-Mini T/R
RN1401(TE85L,F) 功能描述:开关晶体管 - 偏压电阻器 Transistor NPN, 50V, 0.1A RoHS:否 制造商:ON Semiconductor 配置: 晶体管极性:NPN/PNP 典型输入电阻器: 典型电阻器比率: 安装风格:SMD/SMT 封装 / 箱体: 直流集电极/Base Gain hfe Min:200 mA 最大工作频率: 集电极—发射极最大电压 VCEO:50 V 集电极连续电流:150 mA 峰值直流集电极电流: 功率耗散:200 mW 最大工作温度: 封装:Reel
RN1401,LF 制造商:Toshiba America Electronic Components 功能描述:X34 PB-F S-MINI PLN (LF) TRANSISTOR PD=200MW F=250MHZ - Tape and Reel
RN1401_07 制造商:TOSHIBA 制造商全称:Toshiba Semiconductor 功能描述:Switching, Inverter Circuit, Interface Circuit And Driver Circuit Applications
RN1401S,LF 功能描述:开关晶体管 - 偏压电阻器 50V VCBO 50V VCEO 100mA IC 200mW 4.7k RoHS:否 制造商:ON Semiconductor 配置: 晶体管极性:NPN/PNP 典型输入电阻器: 典型电阻器比率: 安装风格:SMD/SMT 封装 / 箱体: 直流集电极/Base Gain hfe Min:200 mA 最大工作频率: 集电极—发射极最大电压 VCEO:50 V 集电极连续电流:150 mA 峰值直流集电极电流: 功率耗散:200 mW 最大工作温度: 封装:Reel